D200
Water Soluble Die Lubricant for Aluminum Die Casting
D200 is a water soluble emulsion type die release agent, which is based on silicone oil and high purity organic synthetic compounds. It is usually determined by ingredients of a die lubricant at what temperature the die lubricant will start wetting the die surface.
A die lubricant which has the ability to adhere to the surface of high temperature, will wet and cool down the die quickly, and if once the die surface is cooled down, the lubricant will adhere to the die more easily and will form a film on it.
D200 adheres to a die surface of high temperature, while, even under relatively low temperature, it is designed to form a “controlled film”. Therefore, it will provide a good die release under a wide range of die temperature.
PERFORMANCE BENEFITS
- Excellent casting surfaces
- Anti-Soldering
- No build up or clogging of spray heads
- Suitable range to high temperature
TYPICAL PROPERTIES
Appearance: Milky White
Density (25 °C): 0.850-1.12
pH 8-11
Concentrate approxi.30
Flash Point: None
USE
Dilutes with water
Standard dilution ratio is 1:120 to 1:200
Stir thoroughly prior to use
HEALTHY AND SAFETY
Under normal conditions of use are not known to offer any serious health hazard
STORAGE
Keep in a cool place and avoid direct sunlight during summer months and keep from freezing in the winter. Keep from contamination.
PACKAGE
18 Liters per Pail/ 200 Liters/ Drum
