D101SI
Water soluble lubricant for Aluminum die-casting.
WSO®D101SI is a water soluble emulsion type die release agent, which is based on silicone oil and high purity organic synthetic compounds. It is usually determined by ingredients of a die lubricant at what temperature the die lubricant will start wetting the die surface.
A die lubricant which has the ability to adhere to the surface of high temperature, will wet and cool down the die quickly, and if once the die surface is cooled down, the lubricant will adhere to the die more easily and will form a film on it.
WSO®D101SI adheres to a die surface of high temperature, while, even under relatively low temperature, it is designed to form a “controlled film”. Therefore, it will provide a good die release under a wide a wide range of die temperature.
Performance Benefits
- Excellent casting surfaces
- Anti-Soldering
- No build up or clogging of spray heads
- Suitable range is medium to high temperature
Typical Properties
Appearance: Milky White
Density (25 °C): 0.990-0.994
pH 8-11
Flash Point: None
Use Recommends
- Dilute with water
- We recommend an initial dilution rate of 80-120 to 1.
Storage
Products should be stored on their sides in a clean, dry place and protected from extremes of sun light.
Health and Safety
Under normal conditions of use is not known to offer any serious health hazard.
Package
18 Liter per Pail /200 Liter per Drum
