Graphite plunger lubricant

WSO®PL102GP is a viscous compound containing micronized graphite, which prevents scoring of the tip, shot sleeve, movable core, etc.

The graphite and base oils in Plunger PL102GPwas selected after considering all the conditions of normal use, and have the most desirable chemical and physical qualities to function in the casting environment. This results in excellent efficiency

WSO®PL102GP provides a heat resistant protective film on all the moving parts operating at high temperature. It prevents scoring of the tip and shot sleeve, and permits operation of the injection system at maximum efficiency thereby assuring that casting occurs at the desired pressure resulting in high density quality castings. It can be used safety. The use of this product in die casting does not product any hazardous gasses.

Performance Benefits
It contains micronized lubricating graphite that will no separate or settle out even at high temp.
It is so efficient that smaller quantities can be use to this reason it is extremely economical.
It reduces problems of gassing and adverse influences on castings

Typical Properties
Appearance: Black liquid
Viscosity (25°C): 4700 – 5300 cSt.

Use
1. WSO®PL102GP is generally used in automatic lubricators.
2. When using in an automatic lubricator, remove the cap and insert the intake pipe.
3. If an exclusive container is used for the system, be careful when you replenish the container with the lubricant not to mix in dust or other foreign materials, which might later become a serious problem.

Storage
Products should be stored on their sides in a clean, dry place and protected from extremes of sunlight and high temperature.

Health and Safety
Under normal conditions of use is not known to offer any serious health hazard.
We would however, recommend good standards of industrial hygiene are observed when handling this product.

Package
16 Kg. /Pail or 178Kg. /Drum