PL202NGP

Oil Based Plunger Lubricant

PL202NGP is non-graphite, liquid-yellow color plunger lubricant, and it has an adequate viscosity for automatic application.

PL202NGP provides a heat resistive protective film on all moving parts operating at high temperature, and permits operation of the injection system at maximum efficiency.

Performance Benefits
Very economical, as a special effort is made to minimize excess run-off
Will not stain casting and keep the workshop clean.
Less fire and smoke
Saving Coast

Typical Properties
Appearance: Liquid-yellow
Density (25 °C): 0.886-0.920
Viscosity (25°C): 400-800 cSt.
Flash Point >260 oC

Use
1. WSO®PL201NGP is generally used in automatic lubricators.
2. When using in an automatic lubricator, remove the cap and insert the intake pipe.
3. If an exclusive container is used for the system, be careful when you replenish the container with the lubricant not to mix in dust or other foreign materials, which might later become a serious problem.

Storage
Products should be stored on their sides in a clean, dry place and protected from extremes of sunlight and temperature.

Health and Safety
Under normal conditions of use is not known to offer any serious health hazard.
We would however, recommend good standards of industrial hygiene are observed when handling this product.

Package
200 Liters/Drum and 18 Liters/Pail